|
Application: For use on Casting Carts, Vibe Tables or other carts or tables where vibration is desired during casting.
 Gruber Pneumatic Ball Type Vibrators are used in vibrate excess air out of marble matrix after pouring. Gruber Vibrators provide high-frequency vibration at an economical price. The only moving part is a high-grade chrome steel ball. Lubrication, while not required, extends the life of the units. Other uses these vibrators are for small hoppers, parts feeders, chutes and match plates. Air consumption for these units is moderate. If the application requires more than three hours per day of operation or requires lubrication-free operation, the Turbine Vibrators may be a better choice.
| Vibrolator™ CV Series Ball Type Vibrators - These ball type vibrators are extra heavy-duty construction for operation in adverse conditions or water, heat, cold and grit. Vibration is controlled from a few cycles per minute to full speed by installation of a needle valve or pressure regulator. These vibrators assure satisfactory and efficient vibration for the toughest jobs. |
|
|
Model CV-25 - extra heavy-duty construction for operation in adverse conditions or water, heat, cold and grit. Vibration is controlled from a few cycles per minute to full speed by installation of a needle valve or pressure regulator. These vibrators assure satisfactory and efficient vibration for the toughest jobs. Order Number 02012
Includes a muffler (shown below):
|
|
|
Model CV-35 - same as the CV-25, but produces up to 675 lbs force at 10,000 VPM. Order Number 02013
Includes a muffler (shown below):
|
|
DV-41 and DV-51 - These vibrators produce all directional vibration required for big jobs. Meets rugged requirements on extra large bins and hoppers.Both feature migratory, replaceable races.
|
 |
#41 - For very rigid hoppers or chutes, the #41 vibrator is without equal. Ideal for larger weigh batchers in ready-mix plants.
Includes a muffler (shown below):
|
|
#51 - This vibrator delivers more vibratory force at lower frequency. An effective unit for use on material that responds best to higher amplitudes and lower frequencies.
Includes a muffler (shown below):
|
Model Number
|
PSI
Required
to Start
|
SPEED, FORCE AND CFM AT PSI
|
Max. Lb Material in Sloped Portion of Bin* |
| 20 PSI |
40 PSI |
60 PSI |
| Vert |
Horz |
Speed
VPM
|
Force
Lbs
|
CFM |
Speed
VPM
|
Force
Lbs
|
CFM |
Speed
VPM
|
Force
Lbs
|
CFM |
| #25 |
30 |
15 |
7,500 |
175 |
6 |
9,700 |
275 |
10 |
11,000 |
380 |
13 |
3,800 |
| #35 |
50 |
25 |
6,800 |
315 |
6 |
8,800 |
530 |
12 |
10,000 |
675 |
17 |
6,750 |
| #41 |
65 |
25 |
3,200 |
255 |
9 |
4,300 |
460 |
16 |
4,900 |
600 |
24 |
6,000 |
| #51 |
80 |
30 |
3,100 |
300 |
12 |
4,200 |
540 |
19 |
4,900 |
750 |
28 |
7,500 |
Same information, organized differently
| Model |
FREQUENCY |
FORCE (LB) |
AIR CONSUMPTION (CFM) |
| 20 PSI |
40 PSI |
60 PSI |
20 PSI |
40 PSI |
60 PSI |
20 PSI |
40 PSI |
60 PSI |
| #25 |
7,500 |
9,700 |
11,000 |
175 |
275 |
380 |
6 |
10 |
13 |
| #35 |
6,800 |
8,800 |
10,000 |
315 |
530 |
675 |
6 |
12 |
17 |
| #41 |
3,200 |
4,300 |
4,900 |
255 |
460 |
600 |
9 |
16 |
24 |
| #51 |
3,100 |
4,200 |
4,900 |
300 |
540 |
750 |
12 |
19 |
28 |
* Rule of thumb Vibrator Sizing.
- One pound of vibrator force for each ten pounds of bin content.
- Mount vibrator as close as possible to material outlet.
- Reinforce mount area to prevent flexure of bin wall at mount location.
Dimensions
All dimensions are expressed in Inches
| Model # |
A |
B |
C |
D |
E |
F |
G |
H |
J |
K |
L |
M |
| #25 |
5-1/4 |
4-1/4 |
2-1/4 |
2-1/4 |
1-1/8 |
4 |
1/2 |
1/2 |
1-3/4 |
1/4 |
3-5/8 |
2-1/2 |
| #35 |
5-1/4 |
4-1/4 |
2-1/4 |
2-1/4 |
1-1/8 |
4 |
1/2 |
1/2 |
1-3/4 |
1/4 |
3-5/8 |
2-1/2 |
| #41 |
6-1/2 |
4-3/4 |
2-13/16 |
2-5/8 |
1-1/2 |
5-1/2 |
1/2 |
3/8 |
2-1/8 |
3/8 |
3-15/16 |
1-1/4 |
| #51 |
6-1/2 |
5-9/32 |
3-9/32 |
3-1/8 |
1-1/2 |
5-1/2 |
1/2 |
3/8 |
2-5/8 |
3/8 |
4-3/16 |
1-3/4 |
Order Information
Vibrators - Ball Type
Description/Order Number
Vibrator #25 - Ea - #02012
Vibrator #35 - Ea - #02013
Vibrator #41 - Ea - #02014
Vibrator #51 - Ea - #02016 (special order)
Replacement Vibrator Mufflers
Vibrator Mufflers are used to further reduce noise during vibration.
Order Information
Muffler - for Vibrator #25 - #02015
Muffler - for Vibrator #35 - #02015
Muffler - for Vibrator #41 - #02017
Muffler - for Vibrator #51 - #
|
