For use with Cultured Marble manufacturing and other composites applications, including

Quickly and easily removes orange peel, sandpaper marks and slight imperfections. Leaves work clean with high lustrous finish. Use on gel-coated fiberglass surfaces after final sanding to bring out luster. Tubes are wrapped in cardboard, and peeled back as needed to expose additional compound. Sattex Buffing Tubes are available in four abrasive grades, and is available in individual 4 lb tubes, Box of 5 tubes, or box of 10 tubes. Some are also available in bulk drum quantities of 125 tubes (see below).

	SKU/Description WP-1 Mild Aggressive White ≈ 3.95 lbs	Finishing compound Fiberglass, and cast polymer, other gel-coated, composite surfaces Removes orange peel, sand paper marks Results—Clean, High luster finish			SKU/Description WP-5 Mild/Medium Aggressive Green ≈ 3.85 lbs	Finishing compound Fiberglass, and cast polymer,other gel-coated, composite surfaces Removes orange peel, sand paper marks, other minor imperfections Results—Clean, High luster finish
	SKU/Description WP-6 Medium Aggressive Pink ≈ 3.80 lbs	Finishing compound Fiberglass, and cast polymer, other gel-coated, composite surfaces Removes orange peel, sand paper marks, other minor imperfections Results—Clean, High luster finish			SKU/Description WP-12 Most Aggressive Blue ≈ 3.75 lbs	Finishing compound Fiberglass, and cast polymer, other gel-coated, composite surfaces Removes orange peel, sand paper marks, other minor imperfections Results—Clean, High luster finish

Note: WP series buffing tubes do NOT need to be used in sequence. Product is alumina-based.

Description/Order Number

WP-1 Series - Mild cut, high luster. White.

WP-1, 4 lb tube, Each - #010154
WP-1, 4 lb tubes, 5/Box - #0101545*
WP-1, 4 lb tubes, 10/Box - #0101545T
WP-1, Drum (124 tubes/500 lb) - QUANTITY DISCOUNT - CALL!

WP-5 Series – Medium cut. Green.

WP-6 Series – Sharp cut, high luster. Pink.

WP-12 Series - Sharpest cut, shine. Blue.