• Filters

• Bushings

• Table Vibrators

• Table Vibrator Replacement Bushings

• Wheels and Casters

Filters

Order Information

Baghouse Grindbooth Filter Bags:

• Filter Bags - 6” diameter x 84”  Large - Ea - #111309
• Filter Bags 6” diameter x 96” Large - Ea - #111310

HEPA Grinding Booth Filters:

• Pre-Filter 20” x 20” X 1”- Ea - #111341
• Pocket Filter 20” x 20” x 12” - Ea - #111343
• HEPA Filter - 24” x 24” x 12” - Ea - #111345

Vacuum Pump Filters (for GS1000/GS1500 Vacuum Mixers):

• Filter Felt, 0740-V104 Vacuum Pump - Pair - #111664
• Vacuum Filter Assembly 0740-V104 - Ea - #111662

Vacuum Pump Filters (for GS1700 Vacuum Mixers):

• Filter, Vacuum Pump, AC393 - Ea - #0838210

Pneumatic System Filters:

• Filter Regulator Unit (Air Conditioner) - Ea - #180510
• Filter Regulator BB3-01-FK00 - Ea - #083205

Tilt/Rotate Cart Filter:

• Evaporator (SPG-100  Laman Air Dryer ) - Ea - #0831610
• Filter replace - L-100 Laman Air Dryer) - Ea - 0831611

Hi-Boy Cart Filter:

• Vent Filter (Hi-Boy Hydraulic Tank) - Ea - #163670

Wheels and Casters

Order Information

Replacement 350# Pot Dolly
Standard Front Wheel - Ea - #083069
Rear Swivel Type - Ea - #083070

Quiet Type Wheel (for Vibrator Tables) with Nut & Bolt (complete unit) - Ea - #0831400

Aluminum Insert For Wheel* - Ea - #0831260
* Aluminum inserts required for bearing assemblies, 2 required per wheel.

Standard Steel w/Wheel (Nut & Bolt) - Ea - #110039

Steel Skatewheel - Ea - #1100390

4”  V-Groove Wheel with Bearing/Bushing/Sleeve - Ea -             #111106

Caster, Standard, Rigid, V-Groove - for Tilt/Rotate Table - Ea -        #083090

Table Vibrators

For use on Electric and Pneumatic Vibrator Tables

Pneumatic Vibrators are used in vibrate excess air out of marble matrix after pouring. Two types are available - ball bearing and turbine vibrators. Vibrator Mufflers are used to reduce the noise during vibration.

Vibrators - Ball Bearing

Vibrators - Turbine

Order Information

• VS-320 Vibrator - #VS-320
• VS-380 Vibrator - #VS-380

Table Vibrator Replacement Bushings

Bushing for new style Pneumatic Vibe Table (with tube frames).

Order Information

• Replacement Bushing - Each - #023007
• Replacement Kit - 8 Bushings - #023007K

Black Vibe Bushings Electric - Replaces vibrator bushings

Used on 3PH Electric Vibrator Table - #023000

Note: When replacing an original bushing, you must replace all bushing, and you may need to lower the table by 1/4”. To replace an original, buy the kit.

Order Information

• Replacement Bushing - Each - #023005
• Replacement Kit - 8 Bushings - #023005K

Kit Stepped Vibe Bushing - Old Style.

For use with old style pneumatic (vibe) tables with channel top frames.

Order Information

• Replacement Kit - 8 Bushings - #023008K