1051 Shower Pan Slip Resistance Specification

Products | Molds | Shower Pans | 1051 Series

All 1051 Series Shower Pans and Universal Shower Ramps include a slip-resistant textured floor surface pattern. A test sample was submitted to an authorized test lab for slip resistance testing.

These are the results of that testing:

Testing Lab:

SGS U.S. Testing Company, Inc.

1341 North 108th East Avenue

Tulsa, OK 74116

Report Number: 146695-1

Report Date: 10/6/00

Report of Test

Subject:	Slip Resistance Evaluation
Sample ID:	One Cultured Marble model 1051-06 36 x 36 shower pan was received from the client on 9/20/00. The unit was received in good condition.
Procedure:	The unit was evaluated in accordance with ASTM F 462-1994. No revisions to this report will be allowed after 90 days of the report date.
Results:	See below
Date Tested:	9/20/00
Conclusion:	The unit does comply with the requirements of ASTM F 462-1994
Certification:	The tests reported here were conducted under the continuous, direct supervision of SGS U.S. Testing Company Inc., Tulsa, OK

Coefficient of Friction data:

Summary: Measured values of textured surface zones ranged from 0.11 - 0.16:

Measurement Zone:	Co-efficient of Friction:
1	0.11
2	0.16
3	0.14
4	0.15
5	0.14
6	0.14
7	0.12
8	0.13
9	0.14

Least Co-efficient of Friction: 0.11 in Zone 1 (0.04 minimum)

Pattern Coverage: A 1.5 inch x 3 inch template located anywhere on the bathing surface does cover a textured area.

Texture Description: Rough Texture

*******

End of Report