Gruber Molds - Panel Molds

Gruber offers a variety of panel molds – suited to a broad range of uses – including wall panels, shower and bath surrounds, and decorative wall treatments.  

Molds include:
  • Bordered Diamond Tile Panels

  • Tile Panel Molds (textured and untextured)

  • Wall Panels (textured and untextured)

  • Glass Panel

  • Raised Border Panel

  • Decorative Wall Panels

Bordered Diamond Tile Panel Molds

Features 8" x 8” tiles (including 1/4” grout surrounding each interior tile), 68 x 84” overall size, with 2 x 8” tile pattern border on three sides.

10” Bordered Diamond Tile Panel
(Back Panel) 60 x 90” overall
PN 23177
[Click Here] Specifications

10” Bordered Diamond Tile Panels
(Side Panel) 36 x 90” overall
PN 23178
[Click Here] Specifications


Tile Panel Molds (Untextured)

These three new Tile Panel Molds offer the ability to create cast polymer wall, counter or even floor panels from a single mold that mimics the look and feel of a traditional tile installation. These new tile panel molds feature 8” x 8” or 10” x 8” tile with simulated grout, a 2 inch border on some or all perimeter edges. Refer to the drawing for specific details and dimensions.

 8 x 8” Tile Panel
Single-Cavity Mold 68 x 84” overall (~173cm x 213cm)
PN 23183

 10 x 8” Tile Panel
Single-Cavity Mold 62 x 60” overall (~157cm x152cm)
PN 22681

 10 x 8” Tile Panel
Two-Cavity Mold Each cavity is 62 x 30” overall (~157cm x 76cm)
PN 22682


Tile Panel Molds (Textured Slate)

Create a “new look” in almost any room with this natural slate tile panel mold. Get the look and beauty of natural slate tiles, combined with the benefits of cast polymer.
Slate Tile Panel Mold

Solid panel, with molded grout lines and grout.

Applications:
  • Shower or bath enclosures
  • Kitchens
  • Hallways
  • Living areas
  • Dining rooms
  • Hotel and Motel rooms
  • Offices or commercial properties
[Click Here] Product Bulletin


Slate Tile Panel Mold
72 x 96 overall
(182.88cm x 243.8cm) PN 26129

Create new sales-generating opportunities by utilizing this new tile panel mold that offers a natural slate look.

With this highly versatile mold, you can cast a variety of materials of any color or apply a variety of pigments or infinite veining alternatives to deliver a custom, high-end wall finish with the 3-dimensional surface texture of natural slate. The panel is comprised of six columns of eight 12” x 12” tiles, for a total of 48 separate tile sections, and the casting can be cut as needed to accommodate many installation requirements.


Textured Panel Molds

Solid wall panel mold with a texture similar to natural slate!
Textured Panel Mold

72” x 96” solid panel, with molded grout lines and grout.

Applications:
  • Shower or bath enclosures
  • Wall panels
  • Flooring and stair steps
  • For kitchens, baths or living areas, as well as commercial - including office, hotel and motel applications
Benefits:
  • Workable sheet stock is easily fabricated and installed
  • Infinite color, material and veining options for a custom “look”
  • Familiar sheet stock size
  • Rigid, durable material
  • Highly durable and stable
  • Insulative material capability

[Click Here] Product Bulletin


This unique mold from Gruber Systems offers a medium-course texture similar to natural slate*. This highly versatile cast polymer mold can provide you with many new and different revenue-generating opportunities beyond the traditional master or secondary bath. Sell wall panels, flooring, stair steps, decks, shower or bath enclosures, trim treatments and more. For use in bathrooms, living areas, offices, hotels and motels, and for many other commercial property applications.

The mold may be cast in any number of materials, using different colors, veining combinations for an almost infinite variety of “looks”. Select from standard cultured marble, onyx, solid surface or other cast polymer materials for a wide range of durable material options that will provide years of beauty, performance and functionality. Familiar sheet stock is easily fabricated and installed, and is easily stored, shipped and inventoried.

NOTE: This panel mold is not intended to match or replicate the same slate texture of our new Slate Tile Panel Mold. This is a somewhat finer, more consistent finish that is similar to slate, but not slate.


Raised Border Panel Molds

Dimensions shown are Width x Length. Depth on all are a standard 3/8” (9.525mm)
Single Cavity
70” x 78”
178cm x 198cm
PN 227440
Single Cavity
45 x 78” Left
114cm x 198cm
PN 227441
Single Cavity
45 x 78” Right
114cm x 198cm
PN 227442
Single Cavity
37 x 78” (94cm x 198cm) LEFT
PN 227443
Single Cavity
37 x 78” (94cm x 198cm) RIGHT
PN 227444
Three-Cavity Mold
8" x 120" (20.3cm x 305cm)
PN 227445
Two-Cavity Mold
8" x 124" (20cm x 315cm)
21” x 124” (53cm x 315cm)
PN 227440



Glass Panel Molds


Durable, low-maintenance glass panel molds

Applications:
  • Shower or bath enclosures
  • Wall panels
  • Flooring and stair steps
  • For kitchens, baths or living areas, as well as commercial - including office, hotel and motel applications
Benefits:
  • Workable sheet stock is easily fabricated and installed
  • Infinite color, material and veining options for a custom “look”
  • Familiar sheet stock size
  • Highly durable and stable
  • Insulative material capability
Options:
  • Customize underlying surface with grid lines for easy set up
  • Light or dark backgrounds available to suit your production needs
  • A variety of textured finishes available
  • Call us for information on logos or designs to personalize your product
 [Click Here] Product Bulletin

Glass panel molds have been used in the Cast Marble and Cast Solid Surface industry for many years. Gruber Systems now offers a complete line of glass panel molds. Gruber’s molds are built with a steel reinforced box construction, to resist warpage, and a simple to remove retaining flange for quick replacement of glass. The retaining flange can be ordered in thickness from 1/4” to 1”. Plate Glass surface can be 1/4”, 3/8” or 1/2” tempered glass. These molds give you a durable, high gloss finish (less finishing), are easy to maintain (replace the glass quickly using local supplier) and are available in custom sizes to suit you unique needs.

NOTE: Glass thickness options are 1/4”, 3/8” or 1/2” tempered plate glass. Custom sized glass panel molds are available – call for more information.


NOTE: This drawing applies to all Panel Molds. Refer to A and B dimensions for each specific product for dimension information.

    Width (A)   Length (B)  
Part No. Description Inches CM Inches CM
3/8” Glass Panel Molds
26012PG PG-34 x 98 x 3/8” Panel; 3/8” Glass 34’’ 86.4 98’’ 248.9
26000PG PG-36 x 72 x 3/8” Panel; 1/4” Glass; 36’’ 91.4 72’’ 183
26013PG PG-37-1/2 x 147-1/2 x 3/8” Panel; 1/4” Glass 37’’ 94 148’’ 275.9
26001PG PG-42 x 60 x 3/8” Panel; 1/4” Glass 42’’ 106.7 60’’ 152.4
26023PG PG-48 x 96 x 3/8” Panel; 3/8” Glass 48’’ 121.9 96’’ 243.8
26014PG PG-60 x 120 x 3/4” Panel; 3/8” Glass 60’’ 152.4 120’’ 304.8
26021PG PG-60 5/16 x 60-5/16 x 3/8” Panel; 1/4” Glass 60-5/16’’ 153.2 60-5/16’’; 153.2
26010PG PG-61 x 62 x 3/8” Panel; 1/4” Glass 61’’ 154.94 62’’ 157.5
26018PG PG-73 x 84 x 3/8” Panel; 1/4” Glass 73’’ 185.4 84’’ 213.37
26019PG PG-73 x 97 x 3/8” Panel; 1/4” Glass 73’’ 185.4 97’’ 246.4
1/2” Glass Panel Molds
26022PG PG-32 x 85 x 1/2” Panel; 1/4” Glass 32’’ 81.3 85’’ 215.9
26011PG PG-61 x 86 x 1” Panel; 1/2” Glass 61’’ 154.94 86’’ 218.4
9/16” Glass Panel Molds
26016PG PG-30-1/4 x 146-1/2 x 9/16” Panel; 1/2” Glass 30-1/4” 76.8 146-1/2” 372.1
26006PG PG-30-3/8 x 146-5/8 x 9/16” Panel; 1/4” Glass 30-3/8” 77.15 30-3/8” 77.15
26017PG PG-31 x 146 x 9/16” Panel; 1/4” Glass 31” 78.4 146” 370.84
26007PG PG-36 x 146 x 9/16” Panel; 1/4” Glass 36” 91.4 146” 370.84
26015PG PG-36-1/2 x 146-1/2 x 9/16” Panel; 3/8” Glass 36-1/2” 92.71 146-1/2” 372.1
26008PG PG-37 x 146 x 9/16” Panel; 1/4” Glass 37” 94 146” 370.84
26009PG PG-60 x 158 x 9/16” Panel; 1/2” Glass 60” 152.4 158” 401.3
5/8” Glass Panel Molds
26005PG PG-61 x 73 x 5/8” Panel; 1/4” Glass 61” 154.94 73” 185.4
1” Glass Panel Molds
26004PG PG-31 x 146 x 1” Panel; 1/2” Glass 31” 78.4 146” 370.84
26003PG PG-37 x 146 x 1” Panel; 1/2” Glass 37” 94 146”