|
Gruber offers the following finishing equipment - for use in post-casting finishing operations for cultured marble and/or solid surface manufacturing operations:
- Panel Sanders - quickly remove material and sand large solid surface panels and other panels.
- Bullnose Edge Trimming System - Easily trim excess flashing material from the bottom of bullnose edges in a fraction of the time - and get better results too!
|
15" Sander for narrow panels and trim lengths
|
37" Sander for larger panels
|
|
- Untrimmed deck casting prior to removing excess trim, positioned on the optional Bullnose Edge Trimming Table.
|
- The Bullnose Edge Trimming Saw with integral deck trimming guide ensures an evenly spaced, consistent cut every time.
|
|
- Simply position a deck casting on the optional
- Trimming System Table.
|
- Simply position the saw with the plastic guide on the deck surface, and set the desired depth of cut.
|
|
- Begin cutting the trim by pulling the saw towards the operator, completing the entire length in one cut.
|
- The resulting cut is completed in seconds - eliminating manual, time and labor-intensive manual grinding process formerly used.
|
|
