|
We manufacture dozens of casting carts and tables - which are used to simplify movement of molds and castings through the production process - or to position molds accurately for use in continuous casting processes.
Exchange Carts
|
|
Standard Exchange Carts are a convenient way to transfer molds either before or after the casting process, from one line of conveyor to another. Product Bulletin |
|
|
|
Hi-Boy™ Elevating Exchange Carts are specifically designed for the transfer of molds to and from elevated or multi level conveyor systems. The use of these carts along with a multi level conveyor either for storage or production can dramatically reduce the space required for a cultured marble factory. Product Bulletin |
|
|
Hi-Boy™ Elevating Exchange Carts are specifically designed for the transfer of molds to and from elevated or multi level conveyor systems. The use of these carts along with a multi level conveyor either for storage or production can dramatically reduce the space required for a cultured marble factory. Product Bulletin |
|
|
|
Tilt and Rotate Carts are specifically designed for the transfer of molds through the gelcoat application. These carts have special features built in to simplify the gelcoating process. Product Bulletin |
|
|
|
Product Bulletin
|
|
|
|
Roller Exchange Carts are an excellent way to transfer cast solid surface panels during the finishing stage of the manufacturing process, from conveyor line to conveyor line. |
|
|
|
Hi-Boy™ Elevating Exchange Carts are specifically designed for the transfer of molds to and from elevated or multi-level conveyor systems. The use of these carts along with a multi level conveyor either for storage or production can dramatically reduce the space required for a cultured marble factory. Same as the Hi-Boy Elevating Exchange Carts (above), except uses rollers instead of casters. |
Casting Tables
 |
The XYZ Mechanized Casting Table is designed for use with the Gruber Autocaster™ continuous casting system, making the process of positioning the mold vertically under the Autocaster much simpler. Sometimes also referred to (incorrectly) as an ACT (Automatic Casting Table).
|
|
|
|
Electric and Pneumatic Vibration Tables provide uniform vibration of the matrix during the casting process, to assist the matrix settle into the mold and eliminate trapped potential air voids. Product Bulletin
|
|
